Top 10 Best Left Hand Drill Bits 2023- The Honest Review

Features :

• BOLT EXTRACTORS: Extraction bits easily remove broken screws, studs, bolts and other fittings effectively. Stripped bolt remover and extractor works on seized bolts, broken fasteners, and commonly called an easy out.
• LEFT HANDED DRILL BIT: Left-hand drill bits are made from cobalt fortified high speed steel for increased durability and service life. Reversed drill bit are used for removing broken bolts or studs turning left to prevent further tightening of the bolt or screw.
• SPIRAL FLUTES: Unscrew tool with spiral flute bit dig into the screw, increasing grip as torque is applied for removal of screws, fasteners and bolts. Strip screw extractor kit gets those stubborn fasteners out.
• METAL CARRYING CASE: Stored in a durable metal index carrying case for easy organization and storage with all sizes that are clearly labeled. Carrying size for when WD40 or easy out lubricant doesn’t get the job done.
• INCLUDES: Sizes: Left hand bits / reversed drillbits – 5/64″, 7/64″, 5/32″, 1/4″, 19/64″ and Matching Alloy Extractors (stud outs) – #1, #2, #3, #4, #5 in a red carrying case.

Features :

• 135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster
• Bits made of high speed M2 steel with a titanium nitride coat for added durability
• Special left hand design can also be used with screw extractors to remove broken fasteners
• Attachable to reversible drills to remove screws, bolts, and studs around the house, garage or on the job site
• Set includes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64 and 1/4 inch bits; Comes in metal index case for easy storage

Features :

• [QUALITY]: This drill bit set is constructed of high speed steel with a titanium nitride coating, which give it very high surface hardness to help penetrate tough materials while highly corrosion resistant reducing friction between bit and workpiece.
• [DESIGN]: These drill bits come with a twist design to increase cutting speed with an angled tip that is a 135 degree split point for precise self-centering and designed to cut holes faster as it prevents walking, clears chips and particles faster.
• [LEFT-HAND BITS]: Special left hand design can also be used with reversible drills with screw extractors to remove broken fasteners and to remove screws, bolts, and studs for home repairs, at your automotive garage, and more.
• [CONVENIENCE]: Each bit has an assigned hole in a drill bit holder with size index markings for quick organization and easy storage for use for home improvement or on the go in a snap.
• [INCLUDES]: 15 Sizes – 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32 and 1/2 inch bits that comes in a metal index case for easy storage.

Features :

• DIMENSIONS – 5pcs HSS left hand drill bits and 5 alloy steel bolt extractor. Screw extractors include 1#, 2#, 3#, 4#, 5#. Left hand drill models include 1/8″, 5/32″, 3/16″, 1/4″, 19/64″.With a portable storage case that provides excellent protection and against lost screw extractors.
• APPLICATION – Damaged Screw Extractor Set Designed to remove broken screws, studs, bolts and other fittings effectively.
• MATERIAL – Made of durable hardened steel and tempered twice for extra hardness, promising you a long lasting screw extractor tool of rugged material and outstanding performance.
• FEATURES – Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor’s grip increases.A musthave tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit.
• HOW TO USE – A broken bolt or screw may be removed from a hole with a Screw Extractor. First, drill a hole in the broken bolt. The correct drill size to use is stamped on each Screw Extractor. Insert Screw Extractor in the hole and, with a Tap Wrench, turn counterclockwise. The Screw Extractor acts like a corkscrew. It grips into the sides of the drilled hole and removes the broken part on its own threads without damaging the threaded hole.
• Screw extractor works on damaged screws and broken bolts from as small as No. 4 screws to as large as a 3 8” bolt. Quickly and easily removes most damaged screws such as hex, Phillips, torx, and square drive. 2 step drill bit and extractor in 1 tool. Professional grade multipurpose extractors are compatible with 1 4” hex shank.

Features :

• 1/16 to 1/4 by 1/64ths (Does not skip any sizes)
• Niobium Nb41 Steel
• Left Hand Thread (Flutes are Counterclockwise)
• Used for Removing Broken Bolt, Screws, and Studs
• Made by Drill Hog USA

Features :

• Industrial M35 Cobalt steel with 135-Degree split point
• Stubby mechanics length drill bit for additional strength

Features :

• High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
• Round shanks allow use with a wide variety of toolholding systems
• Reverse-flute drill bits run in the opposite (clockwise) direction from regular drill bits when making holes
• Features a left hand helix for screw machine applications where spindles rotate counter-clockwise

Features :

• Drill bits made of M-42 8% Cobalt Alloy Steel high-speed steel for super abrasive resistance in tough metals
• 135° split point reduces feed pressure for easier penetration without work hardening
• Each drill bit has a heavy-duty spiral flute design that produces fast chip ejection
• Shorter cutting lips reduce torque for drilling in high-tensile-strength materials
• IRWIN drill bits are great for use with screw extractors
• Drill bits made of M-42 8% cobalt high-speed steel for super abrasive resistance in tough metals
• 135° split point reduces feed pressure for easier penetration without work hardening
• Each drill bit has a heavy-duty spiral flute design that produces fast chip ejection
• Shorter cutting lips reduce torque for drilling in high-tensile-strength materials
• IRWIN drill bits are great for use with screw extractors

Features :

• 1 ) Special left hand design can be used with reversible drills with screw extractors to remove broken fasteners and screws, bolts, and studs for home repairs, at your automotive garage, and more.
• 2 ) Twist design to increase cutting speed with an angled tip that is a 135 degree split point for precise self-centering and designed to cut holes faster as it prevents walking, clears chips and particles faster.
• 3 ) Constructed of M2 high speed steel with a titanium nitride coating, which give it very high surface hardness to help penetrate tough materials while highly corrosion resistant reducing friction between bit and workpiece.
• 4 ) Neatly organized in a metal case, drill indexed, easy storage, size includes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64 and 1/4 inch.
• 5 ) If you aren’t satisfied with your purchase, contact us (seller) through email at any time you want, and we’ll issue you a refund, to ensure you have a nice shopping experience in our store.

Features :

• HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness; Suitable for removing hardened, damaged, rusted & painted-over screws or bolts
• HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling
• CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife
• DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt; Insert left-hand drill bit into drill & set drill to reverse; Drill a hole about 1/16” deep into the screw/bolt; Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt; Use drill, wrench, or tap handle to thread the screw bolt out
• HANDY GADGETS – Mata1 is committed to provide lasting quality tools; Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws